Ikki68 Aurora x AluMizu Bundle


This product is unavailable

The AluMizu Bundle

AluMizu Keycaps + Aluminum Ikki68 Aurora

This bundle is a collaboration with Rensuya to bring you a full aluminum Ikki68 Aurora in their Mizu theme. This bundle is limited to 410 units.

Included with the bundle:

alumizu bundle

  • Aluminum Case: Ikki68 Aurora E-white top case and anodized bottom case
  • Aluminum Keycaps: Alumizu Base Kit, WS Special Kit
  • Bluetooth/VIA PCB: Aurora PCB06 (Iceland, BT and VIA compatible). Can be used in both wired and wireless mode. 1.2mm.
  • Hotswap “极光水” badge and badge base
  • PC plate
  • Mizu stabilizers (6x2U, 1x 6.25U)
  • Silicone dampening pad between PCB & plate
  • Weight Pad (Use this if you are not using the brass weight)
  • Battery Pad (Use this if you are not using the battery)
  • Silicon gasket set
  • Poron Gaskets set
  • Keyboard case
  • Coiled USB cable
    • Mizu themed
  • Keyboard feet
  • Extra stab washers, screws, diodes, sockets, hex screwdriver

Battery Specs:

  • Battery Size: 3543114
    • JST1.25

Note: Battery is not included.

Add on information

Switch Specs:

  • Linear switch
  • Top housing: Polycarbonate
  • Bottom housing: UHMWPE
  • Stem: POM
  • 5-pin PCB Mount
  • Lubed
  • Total travel distance: 3.8mm
  • Actuation travel: 1.90 ± 0.5mm
  • Actuation force: 53 ± 5g
  • Bottom-out force: 63.5g

Poron Dampener Kit:

  • Poron sheet for PCB
  • Poron plate foam

Not in the US? Check out our proxies on Wuque's listing!

Keycap Quality Guide

The set will run from June 2nd to June 20th 11:59 PM EDT.

Estimated Date of Delivery: Please refer to our Project Updates page for the most up to date information.

This is a Group Buy, and Group Buy terms and conditions apply. The estimated date of delivery is just that - an estimate. Delays and setbacks may occur. Upon purchase, you will be charged immediately. And by purchasing this item, you acknowledge everything stated above. There are no refunds or cancellations for this order.  For more information, check out our FAQ

The Ikki68 Aurora is DIY, enthusiast product. It is not terribly complicated to assemble, but some basic tool skills such as managing torque with a screwdriver, and some basic keyboard building skills such as how to install stabilizers, hotswap switches are required.

Reading and following the build guide is essential, especially if it's your first time building. Please make sure you are aware of this before building Aurora.

Customer Reviews

Be the first to write a review