Stabilizer Wires

$3.75

Size
Description

Stabilizer Wires

These stabilizers wires were designed by CannonKeys to meet Cherry specifications for stabilizer wires.

*The 2U wires are also compatible with 2.25U and 2.75U keys.

They have been tested with the following stabilizers and are proven to work well: 

These are sold in packs of 5.

Customer Reviews

Based on 9 reviews
78%
(7)
11%
(1)
0%
(0)
11%
(1)
0%
(0)
A
AK
Cost-Effective for 3U, High Quality, Don't Fit TX AP

As another review pointed out, these wires are thicker than typical wires. TX AP have a tighter clip tolerance on the housings, and these wires cannot move freely.

I haven't tried them on a board yet, but tested them in some in unmounted C3 Equalz stabs and Owlstabs - they seem to work nicely.

These were the cheapest 3U wires (including shipping to US) that I could find.

Thanks for taking the time to review. We did took some measurements and we found that TX AP stab wires are 1.6mm thick, and our wires are also 1.6mm thick. The main difference is that the TX AP stabs have a little bevel on the end of the wires. As you say, TX stabilizer tolerances are really tight, but we're glad that these worked in your C3 and owlstabs. We hope you enjoy!

A
A.A.

all of my 6.25 u wires wasnt balanced

Z
Zack F.
TX APs are no go for the 3u

These are good wires. The approach seems to be the equal and opposite solution TX came up with for loose wires. TX tightened the wire clip tolerance, CK made the wire a tad thicker. Both good solutions for rattly stabs! But, they do not play well together unless you sand the finish off of the wire. The 3u wires do fit nice and tight with the durock v2s I had lying around without sanding.

E
Eric

My bunch of wires were all straight from what I could tell.

A
Anonymous

Nice wires. Do their job.